rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

Heat Demon

ATV TEK

Techmount

Magellan

EcoXGear®

Dynojet

Black

Silver

Blue

Red/Black

Blue/White

Black/White

White

series

Series

Protection

Winches, Plow & Tow

Performance

Storage

Handlebars & Controls

Audio and Tech

Air Filter

Covers

Overfenders & Flares

Luggage

Miscellaneous

Heated Accessories

Tools

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

Lighting

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

$700.00 - $799.99

price

Price

brand

Brand

Pounds: 2500

Pounds: 4500

Inch: 48

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

These heated grips are a rider’s best friend in cold weather conditions, eliminating the aches that come with cold air, wind, and rain out on the trail.  

&nbsp;

<ul>
	<li>3-position switch: Off, Low, High</li>
	<li>Simple plug-and-play design &mdash; no cutting, splicing, or crimping of wires</li>
	<li>Easy clamp installation &mdash; no grip glue needed</li>
	<li>Low power consumption &mdash; draws less than 3 amps while in use</li>
</ul>

The Grizzly 700 Brush Guard provides additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile and adds a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by WARN&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

Combines the nerf bars, footwells, and foot pegs into one accessory.

&nbsp;

<ul>
	<li>1.25&quot;-diameter 6063 aluminum alloy tubing</li>
	<li>Foot Pegs are 2.5&quot; wide and 0.75&quot; longer than stock with two height positions 
	(0.75&quot; lower than stock or 1.25&quot; lower than stock)</li>
	<li>Extruded joint clamp helps make installation and alignment a snap</li>
	<li>Durable 1.5&quot;-wide black nylon webbing that is used in the nerf bar and footwell areas (replacement for wear and tear available separately)</li>
	<li>5&deg; sweep for ultimate leverage, comfort, and clearance</li>
	<li>Meets all AMA&reg; and ATVA&reg; racing regulations</li>
	<li>For closed-course competition only</li>
</ul>

The Aluminum Swing Arm Skid Plate utilizes a high-tech, one-piece design with a brushed-aluminum finish. Helps protect and complement the look of the factory aluminum swing arm. Includes aircraft-quality hardware.

Designed to attach to the accessory GYTR Footwells. Made from high-impact plastic.

The Aluminum Engine/Frame Skid Plate helps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. Cannot be installed in conjunction with Plastic Frame Glide Plate.

The SE Front Grab Bar helps provide protection to components of the front of the ATV while offering a large hand hold to maneuver the machine. Constructed of 1” diameter, 6063 aluminum alloy tubing and durable black powder-coat finish. 

These Aluminum A-Arm Skid Plates help protect A-arms, steering, and suspension components. Constructed of strong, lightweight aluminum alloy sheet metal.

These Front A-Arm Skid Plates provide lightweight, durable protection to lower A-arms. Integrated drain holes guard against mud packing and make for easier cleanup. Brushed aluminum finish.

The Front Grab Bar helps provide protection to components on the front of your YFZ450R while offering a large hand hold to maneuver the machine. Constructed of 1" diameter, 6063 aluminum alloy tubing and a durable black powder-coat finish

The GYTR® Billet Clutch Inner Hub is precision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to a 20% weight reduction and less rotational mass for improved acceleration.

The AXON Winch Wiring Kit includes everything needed to wire an AXON Series winch.

A collaboration with WARN&reg;.

<ul>
	<li>
	Digital handlebar-mounted rocker switch
	</li>
	<li>
	Unit-specific wiring
	</li>
</ul>

&nbsp;

Requires accessory Front Grab Bar #B5R-F84L0-V0-00

The Rear Grab Bar is made of special ball-burnished aluminum tube construction. Flag/whip mounting tab is included.

Meets all AMA and ATVA racing regulations. Requires webbing, sold separately. For closed-course competition only.

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500 lb. capacity</li>
	<li>2,500lb, 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

The Yamaha Sport ATV Cover helps protect your ATV while in storage. Storage bag included.

The Quad Zone ATV Heated Grips by Heat Demon includes heated grips, thumb warmer, controller, DC plug and hardware.

A collaboration with Heat Demon.&nbsp;

Controller offers five levels of heat and four independent heat zones that share one set of display LEDs and setup buttons in a small, compact package. Two auxiliary ports can be used for Heat Demon&reg; Vest or Seat Heater (sold separately) using a 2.5mm DC plug (70 watts each). Totals 40 watts and draws less than 3 amps.

Without sacrificing any style, the Heavy Duty Front Grab Bar protects the front front end, fenders and headlights from brush and trail obstacles. of the Kodiak 450.

<ul>
	<li>
	Integrated mount for easy and convenient installation of Warn AXON winch up to 3500lb.
	</li>
	<li>
	Includes anchor points to securely tie down the front end
	</li>
	<li>
	All-steel 1.5&rdquo; tubing with E-Coated and textured powder coating that matches unit&rsquo;s racks for exceptional durability
	</li>
	<li>
	Easy bolt-on utilizing stock mounting location
	</li>
	<li>
	Conveniently add accessory LED POD lights with integrated mounts
	</li>
</ul>

Direct replacement for the wire rope of the WARN 2500 lb. winch.

The WARN® UTV Synthetic Rope Update Kit includes everything needed to upgrade the 2,500 or 3,500 pound winch from wire to synthetic rope.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>50 feet of 3/16&rdquo; of synthetic rope</li>
	<li>Compatible with 2,500 and 3,500 lb. VRX winches</li>
	<li>WARN Epic Hawse Fairlead with mounting bolts</li>
	<li>Winch rope anchor puck</li>
	<li>Abrasion sleeve</li>
</ul>

The VRX Wiring Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Handlebar-mounted rocker switch</li>
</ul>

&nbsp;

Note

<ul>
	<li>2020 Kodiak 450 requires Mount Kit #DBY-10600-10-00 or Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
	<li>2018-2019 Kodiak 450 requires Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
</ul>

The GYTR® 520 GDO2 O-Ring Chain offers the ultimate balance of performance and durability and is ideal for small and mid-sized off-road motorcycles, sportbikes, and ATVs up to 650cc. Chains will not work on vehicles with a shaft drive.

&nbsp;

Note YZF-R6 and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 650cc</li>
	<li>Clip-type and rivet-type master links included</li>
	<li>Replacement clip-type and rivet-type master links also available, each sold separately</li>
	<li>Tensile strength = 8,000lbs</li>
	<li>120 links</li>
</ul>

These HI/LO ATV Heated Grips by Heat Demon® increase rider comfort.

A collaboration with Heat Demon.&nbsp;

<ul>
	<li>
	Even and consistent heat distribution from unique flex-circuit technology
	</li>
	<li>
	Special molded rubber grips
	</li>
	<li>
	Totals 40 watts and draws less than 3 amps
	</li>
	<li>
	Fits all 7/8&quot; handlebars
	</li>
</ul>

The “Bull Horn” design helps protect the shocks and radiator while offering a large hand hold to maneuver the machine in mud.

<ul>
	<li>
	Wrap-under design provides a smooth transition from the front grab bar to the glide plate without affecting the stock approach angles.
	</li>
	<li>
	Constructed of strong, lightweight 6063 and 5052 aluminum alloy tubing and sheet metal with a durable finish.
	</li>
</ul>

These Utility ATV Rigid Cargo Boxes feature a solid plastic design for durability with solid integrated hinged lids. Water and dirt-resistant seal and design. Two cam-over elastic latches which can be locked with padlocks. Solid mounting system that works with most Utility ATV racks.

&nbsp;

<ul>
	<li>Front trunk: 30&quot;L x 13&quot;W x 9&quot;H</li>
	<li>Rear trunk: 37&quot;L x 16&quot;W x 14&quot;H</li>
</ul>

Direct replacement for the synthetic rope of the WARN 4500 lb. winch.

The front Winch Mount Kit includes everything needed to mount on the stock front grab bar of a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Mount plate</li>
	<li>Dedicated contactor mounting location for ease of installation</li>
</ul>

&nbsp;

Note: Requires&nbsp;Wiring Kit #DBY-10198-00-00, sold separately

&nbsp;

The GYTR 520 GDXL2 Quadra-Ring Lite Chain  is designed to reduce friction up to 40% and last 50% longer than conventional O-ring chains.

<ul>
	<li>The 520 GDXL2 is the lighter version of the 520 GDX chain and is ideal for small and mid-sized off-road motorcycles, sport bikes and ATVs up to 750cc.</li>
</ul>

Note: Chains will not work on vehicles with a shaft drive.

Note: YZF-R6 and YZF-R6S-&nbsp;GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>
	Displacement limit: up to 750cc
	</li>
	<li>
	Rivet-type master link included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,500lbs
	</li>
	<li>
	120 links
	</li>
</ul>

The Yamaha Quick-Release Fastener Kit allow quick and easy, no-tools removal of body work. Kit comes with 10 fasteners and clips.

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES